Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Window Switch on the Ford Ecosport

Model: Ford Ecosport BK, MK 1 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023
Part: Window switch

See other generations:
Video tutorial

To extract the window switch on the Ford Ecosport, first remove the plastic cover of the central handle. Unscrew the screws located behind it and then pull off the entire upper plate of the handle where the window switch is located (to fully remove it, you need to disconnect its connectors).

At this point, extract the switch from the plastic and insert the new part you purchased (which you can find online), then proceed in reverse until complete reassembly. This is a fairly simple job and within reach.


Updated on 26 April 2026 by ScegliAuto


Related tutorials

How to Unlock and Replace the Boot Lock on a Ford EcoSport
Ford Ecosport (2012-2023 / BK, MK 1) This guide shows how to unlock the boot lock on the Ford EcoSport. The tailgate, unlike other cars, opens sideways rather than upwards. After pressin…
How to Replace the Rear Drum Brake on a Ford Ecosport
How to Replace the Rear Drum Brake on a Ford Ecosport
Ford Ecosport (2012-2023 / BK, MK 1) Before starting, lift the rear end of your Ford Ecosport. Begin by removing the rear wheel by unscrewing the relevant fixing bolts. Next, unscrew and…
How and When to Replace the Timing Belt on a Ford Ecosport TDCi
How and When to Replace the Timing Belt on a Ford Ecosport TDCi
Ford Ecosport (2012-2023 / BK, MK 1) Today's guide provides the necessary information for removing and replacing the timing belt on the Ford Ecosport TDCi. For this engine type, the timi…

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos