Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove and Install the DVD Radio on a Ford Focus

Model: Ford Focus MK 1 - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004
Part: Car stereo

See other generations:
Video tutorial

How to remove and install the DVD radio on a Ford Focus? Follow these steps for the removal: switch off the radio, then use the original or aftermarket metal keys to detach the stereo from the vehicle. Insert the keys at the sides of the stereo cover; pull the stereo towards you as shown in the video (after the locking click of the keys) and extract the radio while being careful of the various wiring (disconnect the power connectors and the antenna cable).

Install the new DVD radio with the appropriate metal casing (connect the power connectors).


Updated on 7 March 2026 by ScegliAuto


Related tutorials

How to Install Car Radio on Ford Focus
How to Install Car Radio on Ford Focus
Ford Focus (2004-2011 / MK 2, Focus 2) How do you remove the car radio from the Ford Focus? Let's see how to take it out from the central console of the car. Insert the keys into the holes…
Replacing the Radio in Ford Focus
Replacing the Radio in Ford Focus
Ford Focus (2004-2011 / MK 2, Focus 2) Want to install a new radio in place of the original? Let's look at the disassembly on the Ford Focus. To remove the stereo from the Focus, use the o…
How to Remove the Radio from Your Ford Focus
How to Remove the Radio from Your Ford Focus
Ford Focus (2004-2011 / MK 2, Focus 2) How to remove the radio from your Ford Focus? Not sure how to do it? Let's see in this video how to remove the original stereo: remove the trim aroun…

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos