Do it yourself
| ||||
|
Ford Focus - Video tutorial
Model: Ford Focus
MK 2, Focus 2
- Years 2004-2011 To replace the radio antenna of a Ford Focus, you should start by unclipping and removing the interior light fixture of the cabin. Then, you will need to unscrew the upper fixing screw. This fixing screw holds the radio antenna in place on the top of the car. Once the screw is removed, the antenna will be properly freed. Proceed by pulling out the antenna from the roof of the car, then disconnect the electrical connector, and we will have completed the disassembly. It is important to be careful during this operation to avoid damage to the car's body or the antenna itself. To install the new antenna, you simply need to follow these steps in reverse.
Posted on 10 April 2024 by ScegliAuto
Other guides that may interest you |
How to reset the tire pressure warning light on Dacia Sandero?Let's see below how it is possible to reset the low tire pressure signal on the car: first of all it is necessary to check the correct tire pressure by comparing it with the pressures reported in the use and maintenance manual. After that, turn on the ignition and locate the command on the right side of the steering wheel at the top that allows you to access the on-board computer menu, then select the car symbol, after which select the "up arrow" command up to that the indication "tire pressure" appears on the display. At that point, press the "Ok" control on the steering wheel and keep it pressed to reset the signal. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.016
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |