Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the antenna on the Ford Focus?

Model: Ford Focus MK 2, Focus 2 - Years 2004-2011
Part: Antenna

In this tutorial, you will see how to replace the antenna on the Ford Focus, a very simple and quick operation. First, ensure that the key is not inserted, then carefully pry off the front ceiling light using a flathead screwdriver or, if possible, a plastic spatula. Next, locate the antenna mounting bolt, unscrew it using a Torx T25 key, and remove the antenna from the roof. At this point, simply position the replacement and reassemble everything by following the reverse procedure.

Updated on 20 August 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing Antenna on Ford Focus MK1
Removing Antenna on Ford Focus MK1
Ford Focus (1998-2004 / MK 1) Watch this video for instructions on how to remove the antenna and its base on a first series Ford Focus in simple steps. First, get inside the vehic…
How to install the antenna of the Ford Focus
How to install the antenna of the Ford Focus
Ford Focus (2004-2011 / MK 2, Focus 2) Installing the new antenna on a Ford Focus car is a fairly simple and quick operation to be carried out independently. To install the new antenna, we…
How to Replace the Antenna and Mount on the Roof of the Ford Focus
How to Replace the Antenna and Mount on the Roof of the Ford Focus
Ford Focus (2004-2011 / MK 2, Focus 2) In this video, learn how to replace the antenna and mount on the roof of the Ford Focus. Use a screwdriver to pry between the interior light and the …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos