Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Antenna and Mount on the Roof of the Ford Focus

Model: Ford Focus MK 2, Focus 2 - Years: 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011
Part: Antenna

See other generations:
Video tutorial

In this video, learn how to replace the antenna and mount on the roof of the Ford Focus. Use a screwdriver to pry between the interior light and the headlining panel (without breaking the clips), pull the interior light out of the panel, and disconnect the power connector.

Unscrew the fastening bolt of the antenna mount (located between the metal sheet and the metal support). Fit the new mount onto the roof of the car and attach the supplied antenna (screw the bolt with the screwdriver until fully secured).

Test the antenna's proper functioning.


Updated on 13 March 2026 by ScegliAuto


Related tutorials

How to Replace the Radio Antenna Base on the Roof of a Ford Focus
Ford Focus (2004-2011 / MK 2, Focus 2) Is the radio antenna in your car no longer working? In this video, learn how to replace the radio antenna base on the roof of a Ford Focus. Use a scr…
How to Install the Antenna on a Ford Focus
How to Install the Antenna on a Ford Focus
Ford Focus (2004-2011 / MK 2, Focus 2) Installing a new antenna on a Ford Focus is a task with relatively simple and quick steps that can be done independently. To install the new antenna,…
How to Replace the Radio Aerial on a Ford Focus?
How to Replace the Radio Aerial on a Ford Focus?
Ford Focus (2004-2011 / MK 2, Focus 2) To replace the radio aerial on a Ford Focus, start by removing the interior light fitting from the cabin. Next, unscrew the fixing screw above. This …

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos