Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Ford
    3. :
  3. Focus
    4. : How to disassemble the Ford Focus ST MK3 antenna

Ford Focus - Video tutorial

Model: Ford Focus MK 3 - Years 2011-2018
Part: Antenna
Operation: How to disassemble the Ford Focus ST MK3 antenna

Let's see in this video how to disassemble and replace the radio antenna of the Ford Focus third series, in the ST version. First of all, we open the tailgate of the trunk and start by removing the headlining or the internal lining of the roof, unhooking the side gasket; then we disconnect the electrical connector of our antenna and use a star wrench to unscrew the nut that we find at the base, as shown in the video. At this point we can remove the entire antenna, together with its base, from the outside; we just have to replace it with the new one!


Posted on 1 December 2022 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos