Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Complete Antenna Removal on Ford Focus

Model: Ford Focus MK 3 - Years: 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Antenna

See other generations:
Video tutorial

To completely remove the antenna, you must first take off the headlining; for this maintenance, refer to our other tutorials. Assuming you've already done this, undo the 10 mm bolt that secures the internal antenna mount in the cabin, as shown in the video.

Disconnect the two connectors and exit the vehicle: at this point, you can grasp the antenna from the base and remove it, pulling the cable with the double connector out of the hole as well. Insert the new antenna cable and connect the connectors, then secure the 10 mm bolt, and you're done.

Once the headlining is removed, replacing the antenna is very quick.


Updated on 9 April 2026 by ScegliAuto


Related tutorials

How to Replace the Radio Antenna Base on the Roof of a Ford Focus
Ford Focus (2004-2011 / MK 2, Focus 2) Is the radio antenna in your car no longer working? In this video, learn how to replace the radio antenna base on the roof of a Ford Focus. Use a scr…
Removing Antenna on Ford Focus MK1
Removing Antenna on Ford Focus MK1
Ford Focus (1998-2004 / MK 1) Watch this video for instructions on how to remove the antenna and its base on a first series Ford Focus in simple steps. First, get inside the vehic…
How to Install the Antenna on a Ford Focus
How to Install the Antenna on a Ford Focus
Ford Focus (2004-2011 / MK 2, Focus 2) Installing a new antenna on a Ford Focus is a task with relatively simple and quick steps that can be done independently. To install the new antenna,…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos