Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the light bulbs of the Ford Mustang.

Model: Ford Mustang S197, MK 5 - Years 2005-2014
Part: Tail light bulb

Today we will replace the rear light bulb of the 2006 Ford Mustang. To perform the bulb replacement, we need to open the trunk and using a T30 wrench, we will unscrew the internal screws in the trunk that hold the light in place. We will unscrew the central screws and the side screw of the right light, remove the carpet cover, and using a 30 mm wrench, we will unscrew the internal nuts. We will push the light outward and disconnect the connector. We will remove the worn-out bulbs and insert the new H7 model bulbs. Once the bulb replacement is complete for both lights, we will insert the lights back into their housing and screw in the internal nuts. We will reattach the side carpet cover and secure the external nuts.

Posted on 9 January 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Sync 3 Multimedia System in the Ford Mustang
How to Reset the Sync 3 Multimedia System in the Ford Mustang
Ford Mustang (2015-2023 / MK 6, S550) This guide provides instructions to reset the Sync 3 multimedia system in the Ford Mustang, as well as in other models from the manufacturer. First, …
Maintenance reset on a Ford Mustang
Maintenance reset on a Ford Mustang
Ford Mustang (2015-2023 / MK 6, S550) In this very useful video tutorial today you will be able to see the whole operation step by step to reset the maintenance light on a Ford Mustang, s…
How to reset the service in the Ford Mustang?
How to reset the service in the Ford Mustang?
Ford Mustang (2015-2023 / MK 6, S550) In this tutorial, we will see how to reset the service indicator on the Ford Mustang, a very simple and quick operation that should only be done once…

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos