|
Do it yourself
| |||
| ||||
Programming sequence for the remote control of the 2010 Ford Fiesta
Model: Ford Fiesta
Fiesta 6, MK VI, MK 6
- Years:
2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Video tutorial
The programming sequence illustrated in the video refers to keyless models (therefore with standard button remote). We need to have a pre-programmed and functioning remote to add others. If we have lost all remotes, then a Ford diagnostic tool is required at the workshop. A maximum of 4 remotes can be paired. To enter "programming mode," we sit in the car with all the remotes we intend to program, insert the key into the ignition switch, and quickly turn the key from the "off" position to the "on" (II) position and back 4 times within 6 seconds, ending in "on." After 3 seconds, we will hear a "beep." We immediately remove the key from the ignition. The car is now in programming mode (which lasts 20 seconds). We program the remote by holding down any button for 1 second. The car lights should flash once (or we will hear a beep). To exit programming mode, simply start the car or open and close the door.
Posted on 11 January 2026 by ScegliAuto
Related tutorials
Ford Fiesta
(2008-2017 /
Fiesta 6, MK VI, MK 6)
In this tutorial we can see how to program a remote control in the Ford Fiesta, a very simple and quick operation. To do this, we will obviously need…
Ford Fiesta
(2008-2017 /
Fiesta 6, MK VI, MK 6)
In this tutorial, we can see how to program a new remote control in the Ford Fiesta, a very simple and quick operation. To do this, we will obviously…
Ford Fiesta
(2008-2017 /
Fiesta 6, MK VI, MK 6)
In just a few minutes, you will remove and replace the battery of the key fob for the Ford Fiesta. First, take your key fob and press the small side …
Other guides you may be interested in |
Frequently Asked QuestionsHow to Remove the Rear Seat of a Hyundai Tucson?
To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.075
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
