Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Bulb of a Rear Headlamp on a Ford Fiesta

Model: Ford Fiesta Fiesta 6, MK 6, MK VI - Years 2008-2017
Part: Tail light bulb

This tutorial shows how to replace a bulb in the rear headlamp of a Ford Focus. Open the boot and remove the side trim; you will find a tab or a cap to lift to access the headlamp bolts. Gently move the side carpet aside; unscrew the two bolts securing the lamp using an 8 mm socket. Pull the headlamp slightly outward and disconnect the electrical connector: press the tab and pull out the connector. Remove the bulb holder by turning it to extract it from the housing. At this point, insert the new bulb and reposition the bulb holder in the headlamp, reconnect the connector, and secure the headlamp with the bolts.

Posted on 4 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Rear Headlamp Bulbs on a Ford Fiesta
How to Replace the Rear Headlamp Bulbs on a Ford Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) In this video, learn how to replace the rear headlamp bulbs on a Ford Fiesta: open the boot lid and lift it, then unscrew the retaining nuts of the r…
How to replace the front headlight bulb of the Ford Fiesta 6
How to replace the front headlight bulb of the Ford Fiesta 6
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) Today, thanks to our short video tutorial, we will show you the steps to replace the headlight bulb of the 2013 Ford Fiesta 6. We open the front hood…
How to replace the rear headlight bulb of the Ford Fiesta
How to replace the rear headlight bulb of the Ford Fiesta
Ford Fiesta (2017-2023 / MK 7, MK VII, Fiesta 7) The following video guide will provide us with the tools to independently replace the rear light bulbs of the Ford Fiesta mk8. Let's start the replac…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos