Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Set the Time on a Ford Transit Clock

Model: Ford Transit MK 8 - Years 2014-2024
Part: Clock

In this video, we will see how to change the time on a Ford Transit clock: the operation is carried out using the two buttons directly below the clock display. Press and hold the "set" button for about 3 seconds, and you will see the hour numbers on the display start to flash. By repeatedly pressing the "+" button, you will adjust the time until you reach the desired hour. To switch to minutes, briefly press the "set" button and use the "+" button again to adjust the minutes in the same way. Confirm with "set", and after the display shows the 12/24h option, select the format and simply wait without doing anything else. The flashing will stop indicating that the time has been set correctly.

Posted on 6 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Set the Clock on the Ford Transit Connect
How to Set the Clock on the Ford Transit Connect
Ford Transit (2014-2024 / MK 8) This brief and simple guide explains how to set the clock on the Ford Transit Connect, following the instructions below. First, get inside the vehicl…
How to Set the Clock on the 2005 Ford Transit Van
How to Set the Clock on the 2005 Ford Transit Van
Ford Transit (2000-2006 / MK 6) In this video, you will learn how to set the clock on the 2005 Ford Transit Van. Turn on the ignition and look at the display on the left where the t…
How to Set the Time on the Ford Transit
How to Set the Time on the Ford Transit
Ford Transit (2014-2024 / MK 8) Quickly and easily set the time on the Ford Transit by following the instructions below. First, get into the vehicle and turn on the ignition; then g…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos