Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the External Rear-View Mirror of the Ford Ranger

Model: Ford Ranger MK 3 - Years 1998-2011
Part: Side mirror

Below, we will discover the steps to dismantle and replace the external rear-view mirror of the Ford Ranger. First, open the front door of the vehicle and begin to dismantle and remove the door panel by unscrewing the securing screws; then remove the triangular plastic cover of the mirror by unscrewing the securing screws to slide it off and remove it, as shown in the video. At this point, replace and install the new mirror, adjusting the glass; finally, reassemble the door panel and the triangular cover.

Posted on 18 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacement of the External Wing Mirror
Replacement of the External Wing Mirror
Ford Ranger (1993-1997 / MK 2) In this video, the procedure for replacing an external wing mirror (driver side) of a Ford Ranger is shown. Start by detaching the top part of the wi…
How to replace the turn signals on the external rearview mirror of the Ford Ranger
How to replace the turn signals on the external rearview mirror of the Ford Ranger
Ford Ranger (2011-2023 / T6, P375, PX) Today we will explain how to replace the turn signal bulb of the Ford Ranger T6 model. Press on the mirror to push it upwards in order to remove the …
How to Replace the Fuel Filter on a Ford Ranger Pickup?
How to Replace the Fuel Filter on a Ford Ranger Pickup?
Ford Ranger (2011-2023 / T6, P375, PX) In this tutorial, you will see how to replace the fuel filter on a Ford Ranger pickup, a very simple and quick operation. First, ensure that the engi…

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos