Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the External Wing Mirror

Model: Ford Ranger MK 2 - Years 1993-1997
Part: Side mirror

In this video, the procedure for replacing an external wing mirror (driver side) of a Ford Ranger is shown. Start by detaching the top part of the window handle to access the Torx screw that secures it to the door: unscrew it and remove the handle. Unscrew the screws securing the armrest, remove it, and access the screws that hold the inner door panel, which will also need to be removed. Detach the triangular inner panel near the side mirror and remove the three bolts securing the side mirror (using an 11 mm socket and extension). Extract the old mirror and fit the new one. Reassemble everything in reverse order.

Updated on 5 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacement of the External Rear-View Mirror of the Ford Ranger
Replacement of the External Rear-View Mirror of the Ford Ranger
Ford Ranger (1998-2011 / MK 3) Below, we will discover the steps to dismantle and replace the external rear-view mirror of the Ford Ranger. First, open the front door of the vehicl…
How to replace the turn signals on the external rearview mirror of the Ford Ranger
How to replace the turn signals on the external rearview mirror of the Ford Ranger
Ford Ranger (2011-2023 / T6, P375, PX) Today we will explain how to replace the turn signal bulb of the Ford Ranger T6 model. Press on the mirror to push it upwards in order to remove the …
Replacement of Rear Headlamp Bulb
Replacement of Rear Headlamp Bulb
Ford Ranger (1993-1997 / MK 2) Remove the fixing screws of the rear lamp, located at the top of the driver's cabin, disconnect the connector attached to it and connect it to the ne…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos