Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to change the rear position light fuse on a Ford C-Max

Model: Ford C Max MK 2 - Years 2010-2019
Part: Fuse box

Below is a description of how to access the fuse box of this vehicle. Under the glove compartment (passenger side), there is a fabric cover similar to the interior trim held by two pins; to remove them, pull firmly outward and take off the cover. At this point, you are inside the box where all the fuses are located. Identify the fuse related to the rear position lights (you may want to refer to the user and maintenance manual), and once replaced, you can put the cover back on the fuse box following the same procedure to close everything.

Updated on 11 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Where is the horn fuse located in the Ford C Max?
Where is the horn fuse located in the Ford C Max?
Ford C Max (2010-2019 / MK 2) The Ford C Max has three fuse boxes inside. In today's video, however, we will explain the location of the horn fuse. The horn fuse of our Ford is lo…
Where is the Cigarette Lighter Fuse in the Ford C-MAX?
Where is the Cigarette Lighter Fuse in the Ford C-MAX?
Ford C Max (2010-2019 / MK 2) In this video, you will see where the fuse for the cigarette lighter is located in the Ford C-MAX, an element to check in case of complete malfunctio…
Where to find and how to access the fuse box of a Ford C-Max?
Where to find and how to access the fuse box of a Ford C-Max?
Ford C Max (2003-2010 / MK 1) The fuse box of your Ford C-Max is located beneath the glove compartment of the front passenger side. To access it, start by opening the front passen…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos