Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Fuel Pump on a Ford Focus

Model: Ford Focus MK 3 - Years: 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Fuel pump

See other generations:
Video tutorial

Briefly, here are the instructions to remove and replace the fuel pump on a Ford Focus. First, open the rear doors of the vehicle and begin removing the rear seat; in this case, the metal sheet is cut to access the top of the fuel pump without removing the tank.

At this point, disconnect the electrical connector and the fuel supply line, then remove the pump retaining ring to take it out of the tank; replace the fuel pump with a new original one!


Posted on 23 August 2026 by ScegliAuto


Related tutorials

Ford Focus (1998-2004 / MK 1) Today, this guide will show you the main instructions to dismantle and replace the fuel pump in the Ford Focus. To access the fuel pump or the float,…
Ford Focus (2011-2018 / MK 3) In this guide, follow the steps to disassemble and replace the fuel pump on the Ford Focus. First, lift the vehicle and disconnect the fuel line from…
Ford Focus (2004-2011 / MK 2, Focus 2) To replace the fuel pump on a Ford Focus, completely remove the rear seat bench to access the components underneath. Here, you will find the protecti…

Other guides you may be interested in

How to Activate the Disabled TRC on the Toyota Yaris?

As the video clearly shows, disabling or activating the traction control (TRC or ESP) on the Toyota Yaris is very simple. By default, the traction system activates every time the vehicle is started. To disable it, simply press the button depicting a skidding car located in the centre of the vehicle where the controls are, such as the hazard lights and the radio, but near the handbrake. Once disabled, the TRC off light will illuminate on the dashboard. To reactivate it, just press the same button again.

Watch the video!


by ScegliAuto

More videos