Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Access the Fuel Pump of the Ford Focus

Model: Ford Focus MK 3 - Years: 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Fuel pump

See other generations:
Video tutorial

Today's guide will show you the steps to access and remove the fuel pump of the Ford Focus. First, open the rear doors and start removing the rear seat; then, remove the fuel pump cover located underneath to gain access, as shown in the video.

At this point, disconnect the electrical connector and the fuel lines by unscrewing the pump collar to remove it from the tank; simply replace it with the new original part, applying the reverse procedure!


Updated on 29 September 2026 by ScegliAuto


Related tutorials

Replacing the fuel pump in the Ford Focus
Replacing the fuel pump in the Ford Focus
Ford Focus (1998-2004 / MK 1) Today, this guide will show you the main instructions to dismantle and replace the fuel pump in the Ford Focus. To access the fuel pump or the float,…
How to Replace the Fuel Pump on a Ford Focus
How to Replace the Fuel Pump on a Ford Focus
Ford Focus (2011-2018 / MK 3) Briefly, here are the instructions to remove and replace the fuel pump on a Ford Focus. First, open the rear doors of the vehicle and begin removing …
How to Replace the Fuel Pump on the Ford Focus
How to Replace the Fuel Pump on the Ford Focus
Ford Focus (2011-2018 / MK 3) In this guide, follow the steps to disassemble and replace the fuel pump on the Ford Focus. First, lift the vehicle and disconnect the fuel line from…

Other guides you may be interested in

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos