Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Fuel Pump on the Ford Focus

Model: Ford Focus MK 3 - Years: 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Fuel pump

See other generations:
Video tutorial

In this guide, follow the steps to disassemble and replace the fuel pump on the Ford Focus. First, lift the vehicle and disconnect the fuel line from the tank by unscrewing the securing bolts to lower it from the vehicle's frame and access the fuel pump; then disconnect the electrical connector of the fuel pump and the hoses, removing it from the tank, as shown in the video.

At this point, install the new original fuel pump, reassembling the fuel tank onto the vehicle!


Updated on 8 August 2026 by ScegliAuto


Related tutorials

Remove the Fuel Pump from the Ford Focus mk3
Remove the Fuel Pump from the Ford Focus mk3
Ford Focus (2011-2018 / MK 3) To remove the fuel pump from the Ford Focus, first, remove the entire rear seat. Once removed, the fuel pump will be located at the hole where the el…
How to Replace the Fuel Filter on a Ford Focus
How to Replace the Fuel Filter on a Ford Focus
Ford Focus (2004-2011 / MK 2, Focus 2) Before you can start removing the fuel filter, you need to remove the fuel pump fuse located in section twelve of the fuse box to work safely. The fu…
How to Change the Fuel Pump on a Ford Focus
How to Change the Fuel Pump on a Ford Focus
Ford Focus (2011-2018 / MK 3) In today's video, you will learn how to remove and replace the fuel pump on a Ford Focus by following the instructions below. First, lift the vehicle…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos