Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Remove the Fuel Pump from the Ford Focus mk3

Model: Ford Focus MK 3 - Years 2011-2018
Part: Fuel pump

To remove the fuel pump from the Ford Focus, first, remove the entire rear seat. Once removed, the fuel pump will be located at the hole where the electronic connector is situated. In this case, you can use a small angle grinder to cut away the metal above the fuel pump. Disconnect the electronic connector above the pump first, then remove the side drain hose by gently releasing the clip and carefully sliding the hose off to avoid breaking it. Now, insert a flat screwdriver between the metal and the pump and lever it to unlock. You can now extract the fuel pump.

Updated on 27 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Guide to Removing the Fuel Pump from a Ford Focus
Ford Focus (1998-2004 / MK 1) Today's guide will illustrate the main steps for removing and replacing the fuel pump on a Ford Focus. First, open the rear doors and begin removing …
Instructions for Replacing the Fuel Injection Pump on a Ford Focus 2.0 Ecoblue
Instructions for Replacing the Fuel Injection Pump on a Ford Focus 2.0 Ecoblue
Ford Focus (2011-2018 / MK 3) In today's tutorial video, you will see the instructions on how to remove the high-pressure fuel injection pump from a Ford Focus ST 2.0 Ecoblue. Fir…
Replacing the fuel pump in the Ford Focus
Replacing the fuel pump in the Ford Focus
Ford Focus (1998-2004 / MK 1) Today, this guide will show you the main instructions to dismantle and replace the fuel pump in the Ford Focus. To access the fuel pump or the float,…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos