Do it yourself
| ||||
|
Ford Focus - Video tutorial
Model: Ford Focus
MK 2, Focus 2
- Years 2004-2011 The operation of replacing the fuel pump of the Ford Focus is carried out by completely removing the rear seat cushion of the car, so that access to the components in its lower part is obtained: here you can find the pump's protective panel, which must be detached in order to have access to the underlying pump. The latter must be disconnected from its housing, removing the fuel lines and extracting it from its respective seat; at this point, it will be possible to insert the new replacement part, assembling all the previously removed components.
Posted on 11 November 2023 by ScegliAuto
Other guides that may interest you
|
Frequently Asked QuestionsHow to reset the TPMS light of the Volkswagen Polo 2011The orange tire light indicates the presence of one or more tires with an inflation pressure below the recommended limit. All this is easily solved by inflating them correctly or replacing them in the event of a puncture. After carrying out these operations it is necessary to reset the warning light and therefore also the sensor in order to have new reading data. All you have to do is start the car ignition and then fully open the glove compartment on the passenger side. Locate the two buttons in the right corner and press "Set". At this point the reset is complete and you can turn off the ignition. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.025
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |