Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Fuse Box from a Ford Transit?

Model: Ford Transit MK 4 - Years 1986-1994
Part: Fuse box

Today, you will learn how to remove the fuse box from a Ford Transit MK4 model. The fuse box you will be removing is located inside the cabin, under the steering wheel. To carry out this operation, you need to unscrew the two screws securing the fuse box cover using a Phillips screwdriver. Loosen the screws that secure the dashboard so that you can remove the fuse box more easily; again, use a Phillips screwdriver for this. Disconnect the central connector and pull the box outwards. To reinstall the fuse box, follow the steps in reverse.

Posted on 12 September 2026 by ScegliAuto

Video tutorial

Related tutorials

Where to Find the Fuse Box of the Ford Transit Mk7
Where to Find the Fuse Box of the Ford Transit Mk7
Ford Transit (2006-2014 / MK 7) In this guide, you will discover where the fuse box is located inside your Ford Transit Mk7 (2006-2014) and what you need to do to access the fuses f…
Where to Find the Fuse Box of the 2018 Ford Transit Connect
Where to Find the Fuse Box of the 2018 Ford Transit Connect
Ford Transit (2014-2024 / MK 8) If one or more fuses in your 2018 Ford Transit Connect are blown and you want to replace them, follow the instructions in this mini guide to easily l…
What is the Fuse Diagram for a Ford Transit Custom and Where is the Fuse Box Located?
What is the Fuse Diagram for a Ford Transit Custom and Where is the Fuse Box Located?
Ford Transit (2014-2024 / MK 8) The attached video shows the fuse placement diagram for our Ford Transit Custom. The fuses protect the vehicle's electrical components from sudden po…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos