Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the driver's side spring in a Ford Transit Mark 8?

Model: Ford Transit MK 8 - Years 2014-2024
Part: Steering wheel

Replacing the steering wheel spring on the driver's side of a Ford Transit Mark 8 requires attention and patience, but it is not an impossible task. Start by disconnecting the battery to avoid short circuits or accidental activation of the airbag. Remove the steering wheel cover, unscrew the bolts holding the steering wheel to the steering column, and disconnect the airbag, being careful with the connectors. Then, locate the spring, which is usually located under the steering wheel. Use pliers to remove it gently, without damaging other components. Place the new spring, making sure it is well centered and secured. Finally, reassemble the airbag and steering wheel, being careful with the connections. Test the new spring to ensure it functions correctly. If you do not feel comfortable doing it yourself, contact an expert.

Posted on 10 April 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Find the Fuse Box on the Ford Transit
How to Find the Fuse Box on the Ford Transit
Ford Transit (2014-2024 / MK 8) On the Ford Transit, the driver's side fuse box is located behind a removable trim panel: by removing that panel, you gain direct access to the fuse …
Replacing the Diesel Filter on a Ford Transit MK VII
Replacing the Diesel Filter on a Ford Transit MK VII
Ford Transit (2006-2014 / MK 7) To prevent dirt from entering the fuel system of the Ford Transit MK VII with the diesel, a specific filter is installed that must be replaced period…
How to Replace the Cabin Filter of the 2015 Ford Transit
How to Replace the Cabin Filter of the 2015 Ford Transit
Ford Transit (2014-2024 / MK 8) Replacing the cabin air filter in your 2015 Ford Transit (Mark 8) is a straightforward task. First, completely switch off the vehicle and park it saf…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos