Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Deactivate the Airbag on a 2016 Ford Transit

Model: Ford Transit MK 8 - Years 2014-2024
Part: Airbag

Deactivating the airbag on a 2016 Ford Transit is a simple but potentially dangerous operation. Only perform this if absolutely necessary, and immediately replace the system's protection after maintenance. To deactivate the airbag, enter the vehicle and sit in the driver's seat, turn the steering wheel to the right, and insert the specific key into the hole behind the ignition for deactivation. Once the key is inserted, make a small upward movement to deactivate it. To reactivate the system, follow the same procedure.

Updated on 16 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to deactivate the passenger airbag in the Ford Transit van?
How to deactivate the passenger airbag in the Ford Transit van?
Ford Transit (2014-2024 / MK 8) This tutorial shows how to deactivate the passenger airbag in the Ford Transit van, a very simple operation that must be carried out whenever a rear-…
How to Disable the Passenger Airbag in the Ford Transit Van?
How to Disable the Passenger Airbag in the Ford Transit Van?
Ford Transit (2014-2024 / MK 8) In this tutorial, you will see how to disable the passenger airbag in the Ford Transit van, a very simple and quick operation, necessary whenever a c…
Where to Find and How to Access the Airbag Fuse on a Ford Transit Custom?
Where to Find and How to Access the Airbag Fuse on a Ford Transit Custom?
Ford Transit (2014-2024 / MK 8) The airbag fuse on your Ford Transit Custom is located inside the fuse box. The fuse box is situated within the cabin, near the lower right side of t…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos