Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Location and diagram of the fuse boxes in Ford Kuga MK3

Model: Ford Kuga - Years 2020-2026
Part: Fuse box

In this video, we see the details of the position of each individual fuse within the Ford Kuga MK3 (specifically the 2023 version). There are three boxes containing these fuses: the main box is located behind the compartment under the glove box, in the classic Ford layout. Access it by opening the glove box, lowering it with the side tabs, and then opening the compartment behind it. A second box is found under the bonnet on the right side of the engine (when looking at the vehicle from the front). Some models may have an additional box in the side panel above the left wheel arch in the boot.

Posted on 26 September 2026 by ScegliAuto

Video tutorial

Related tutorials

Localization and diagram of the fuse boxes of the Ford Kuga MK2
Localization and diagram of the fuse boxes of the Ford Kuga MK2
Ford Kuga (2012-2019 / C520, MK 2) In this video, we can see the layout and the fuse diagram of the Ford Kuga MK2 built between 2012 and 2019: we find the cabin fuse box in the typical…
Location and diagram of the fuse boxes of the Ford Kuga
Location and diagram of the fuse boxes of the Ford Kuga
Ford Kuga (2012-2019 / C520, MK 2) In this video, we see the arrangement of the fuse boxes on the Ford Kuga MK2: the same arrangement applies to the American version of the model calle…
Fuse Diagram and Placement for the Ford Kuga
Fuse Diagram and Placement for the Ford Kuga
Ford Kuga (2020-2026 / MK 3) Today's brief guide shows the fuse diagram and layout for the Ford Kuga, following the instructions below. First, get into the vehicle on the front p…

Other guides you may be interested in

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos