Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Location and diagram of the fuse boxes of the Ford Kuga

Model: Ford Kuga MK 2, C520 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Fuse box

See other generations:
Video tutorial

In this video, we see the arrangement of the fuse boxes on the Ford Kuga MK2: the same arrangement applies to the American version of the model called Escape. We therefore find the cabin fuse box in the classic configuration of Ford vehicles, located behind the glove compartment.

This can be easily removed - after being emptied - simply by pressing inward on the supports. Behind it, we will find the fuse box. A second box is located in the engine compartment, in front of the driver (left-hand drive) on the right side of the starter battery (looking at the vehicle from the front).

A third box is positioned above the wheel arch on the right side, in the trunk, behind a panel in the carpet lining.


Posted on 17 January 2026 by ScegliAuto


Related tutorials

Location and Diagram of the Fuse Boxes on a Ford Kuga II
Location and Diagram of the Fuse Boxes on a Ford Kuga II
Ford Kuga (2012-2019 / MK 2, C520) Let's look at the layout of the fuse boxes on the Ford Kuga II, starting with the one inside the cabin. This is located behind the glove compartment,…
Location and Diagram of the Fuse Boxes in a 2013 Ford Kuga
Location and Diagram of the Fuse Boxes in a 2013 Ford Kuga
Ford Kuga (2012-2019 / MK 2, C520) You will find the cabin fuse box in the Ford Kuga MK2 in the typical position of modern Fords, which is behind the glove compartment. To access it, y…
Location of Fuse Boxes in the Ford Kuga MK3
Location of Fuse Boxes in the Ford Kuga MK3
Ford Kuga (2020-2026 / MK 3) In this video, you will see that the cause of a malfunction in one of the electrical components of the Ford Kuga may stem from the protection interve…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos