Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Localization and diagram of the fuse boxes of the Ford Kuga MK2

Model: Ford Kuga MK 2, C520 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Fuse box

See other generations:
Video tutorial

In this video, we can see the layout and the fuse diagram of the Ford Kuga MK2 built between 2012 and 2019: we find the cabin fuse box in the typical position for Ford vehicles, that is, under the glove compartment. We need to remove the lower part of the glove box to access the panel that contains the fuses.

A second fuse box is located in the engine compartment, on the right side of the battery, and contains not only fuses but also relays. A third box is located in the trunk, behind the passenger (left-hand drive), inside a recess that can be accessed by unscrewing a small screw.


Posted on 9 January 2026 by ScegliAuto


Related tutorials

Location and diagram of the fuse boxes of the Ford Kuga
Location and diagram of the fuse boxes of the Ford Kuga
Ford Kuga (2012-2019 / MK 2, C520) In this video, we see the arrangement of the fuse boxes on the Ford Kuga MK2: the same arrangement applies to the American version of the model calle…
Location and Diagram of the Fuse Boxes in a 2013 Ford Kuga
Location and Diagram of the Fuse Boxes in a 2013 Ford Kuga
Ford Kuga (2012-2019 / MK 2, C520) You will find the cabin fuse box in the Ford Kuga MK2 in the typical position of modern Fords, which is behind the glove compartment. To access it, y…
Fuse Diagram and Placement for the Ford Kuga
Fuse Diagram and Placement for the Ford Kuga
Ford Kuga (2020-2026 / MK 3) Today's brief guide shows the fuse diagram and layout for the Ford Kuga, following the instructions below. First, get into the vehicle on the front p…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos