Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Engine Oil Pressure Sensor on a Ford Focus 2.0L

Model: Ford Focus MK 3 - Years: 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018

See other generations:
Video tutorial

In this guide, discover the instructions to remove and replace the engine oil pressure sensor on a Ford Focus 2.0L. First, locate the oil pressure sensor, which is found at the front and lower part of the engine; to access it, you need to remove the front bumper, as shown in the video.

Next, disconnect the electrical connector from the sensor, then unscrew the oil pressure sensor to remove it and replace it with the new original one; reassemble and connect the sensor, resetting any engine fault light.


Posted on 24 October 2026 by ScegliAuto


Related tutorials

Where is the engine oil pressure sensor located in the Ford Focus?
Where is the engine oil pressure sensor located in the Ford Focus?
Ford Focus (2004-2011 / MK 2, Focus 2) In this video, you can see where the engine oil pressure sensor is located in the Ford Focus. This component is crucial for the proper functioning of…
Replacing the Engine Oil Pressure Sensor
Replacing the Engine Oil Pressure Sensor
Ford Focus (1998-2004 / MK 1) It is recommended to perform this repair with the engine cold to avoid unpleasant burns, especially since the oil pressure sensor is located at the r…
Replacing the Coolant Temperature Sensor of the Ford Focus 2.0L
Replacing the Coolant Temperature Sensor of the Ford Focus 2.0L
Ford Focus (2011-2018 / MK 3) Below are the main instructions to remove and replace the coolant temperature sensor of the Ford Focus 2.0L engine. First, open the bonnet of the veh…

Other guides you may be interested in

How to Open the Bonnet of the Mitsubishi L 200

In this brief and simple guide, follow these quick steps to open the bonnet of the Mitsubishi L 200. First, open the front door on the driver's side and pull the release lever for the bonnet lock. Next, move to the front of the vehicle and disengage the lock lever to open it. The bonnet will be held up by hydraulic struts; to close it, push the bonnet down and apply pressure to secure it properly!

Watch the video!


by ScegliAuto

More videos