Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to change the engine oil and oil filter of the Ford Focus

Model: Ford Focus MK 3 - Years: 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Engine oil

See other generations:
Video tutorial

In a few simple steps, replace the engine oil and oil filter, performing the routine maintenance service on the Ford Focus. First, raise the vehicle and start unscrewing the oil drain bolt located under the engine, allowing it to drain into a container for about ten minutes; then use the appropriate tool to unscrew the oil filter cartridge located next to it, as shown in the video.

Next, unscrew the filler cap and pour in the new engine oil, ensuring it meets the specifications listed in the owner's manual!


Updated on 3 November 2026 by ScegliAuto


Related tutorials

How to Change Engine Oil on a Ford Focus
How to Change Engine Oil on a Ford Focus
Ford Focus (1998-2004 / MK 1) How do you change the engine oil and filter on a Ford Focus? Let’s look at the replacement process. Open the car door and pull up the engine compartm…
How to replace the engine oil and oil filter of the Ford Focus 3
How to replace the engine oil and oil filter of the Ford Focus 3
Ford Focus (2011-2018 / MK 3) Today we will explain how to replace the engine oil and oil filter on a Ford Focus 3 car. We open the front hood and unscrew the oil filler cap, pour…
How to Replace the Engine Oil and Filter on a Ford Focus
How to Replace the Engine Oil and Filter on a Ford Focus
Ford Focus (2004-2011 / MK 2, Focus 2) How to replace the engine oil and filter on a Ford Focus? Follow this guide to proceed with the replacement: open the car door and pull up the engine…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos