Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Oil Filter on a Ford Focus 1.6 TDCi?

Model: Ford Focus MK 3 - Years: 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Oil filter

See other generations:
Video tutorial

Replacing the oil filter on the Ford Focus is not difficult to do independently and can be performed whenever you service the car. To access the filter, first remove the air hose by unfastening the two clips that hold it in place. Once the hose is removed, it is easier to access the filter cover, which must be unlatched from its housing.

Now you can extract the filter and replace it with a new one. Before reattaching the filter cap, also change its seal. At this point, you can reattach the air hose and reposition the clips.


Updated on 22 May 2026 by ScegliAuto


Related tutorials

How to Replace the Fuel Filter on a Ford Focus 1.6 TDCi MK2
How to Replace the Fuel Filter on a Ford Focus 1.6 TDCi MK2
Ford Focus (2004-2011 / MK 2, Focus 2) Let's see how to change the fuel filter on a Ford Focus 1.6 TDCi MK2, using a syringe as a siphon. First, clean off all debris with a can of compress…
Replacing the Diesel Filter of the Ford Focus 1.6 TDCi
Replacing the Diesel Filter of the Ford Focus 1.6 TDCi
Ford Focus (2004-2011 / MK 2, Focus 2) The following steps will show you how to remove and replace the diesel filter of the Ford Focus 1.6 TDCi. First, open the bonnet of the vehicle and b…
How to Remove the Diesel Filter from the Ford Focus 1.5 TDCI
How to Remove the Diesel Filter from the Ford Focus 1.5 TDCI
Ford Focus (2011-2018 / MK 3) This guide shows you how to remove and replace the diesel filter on the Ford Focus 1.5 TDCI, following the instructions below. First, open the bonnet…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos