Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Fuel Filter on a Ford Focus 1.6 TDCi MK2

Model: Ford Focus MK 2, Focus 2 - Years: 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011
Part: Diesel fuel filter

See other generations:
Video tutorial

Let's see how to change the fuel filter on a Ford Focus 1.6 TDCi MK2, using a syringe as a siphon. First, clean off all debris with a can of compressed air. Remove the connectors and pull out the filter.

In the meantime, obtain the filter, which can be found on Amazon with code B00AYHJB68 at a price of £27.87, including delivery. Refit the new filter, reconnecting the electrical connectors.

Tighten the screws to 8 Nm. Now fill the filter using a syringe; it will take several pumps (in this case, 14 were needed). Now try to start the vehicle.

All done!


Updated on 12 August 2026 by ScegliAuto


Related tutorials

Replacing the Diesel Filter of the Ford Focus 1.6 TDCi
Replacing the Diesel Filter of the Ford Focus 1.6 TDCi
Ford Focus (2004-2011 / MK 2, Focus 2) The following steps will show you how to remove and replace the diesel filter of the Ford Focus 1.6 TDCi. First, open the bonnet of the vehicle and b…
How to Replace the Fuel Filter on a Ford Focus 1.5 TDCI
How to Replace the Fuel Filter on a Ford Focus 1.5 TDCI
Ford Focus (2011-2018 / MK 3) This guide briefly explains the steps to remove and replace the fuel filter on a Ford Focus 1.5 TDCI. First, open the engine bonnet and locate the fu…
How to Replace the Fuel Filter on a Ford Focus MK3 2.0 TDCi
How to Replace the Fuel Filter on a Ford Focus MK3 2.0 TDCi
Ford Focus (2011-2018 / MK 3) This video provides instructions for removing and replacing the fuel filter on a Ford Focus MK3 2.0 TDCi in simple steps. First, open the bonnet of y…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos