Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Engine Oil and Oil Filter on the Ford Focus 1.8 TDCi

Model: Ford Focus MK 1 - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004
Part: Oil filter

See other generations:
Video tutorial

The steps outlined below will show you how to carry out the regular maintenance service by replacing the engine oil and oil filter on the Ford Focus. First, lift the vehicle and unscrew the oil drain bolt located under the engine, allowing it to drain into a container for about ten minutes; then unscrew the oil filter cartridge using the appropriate tool, replacing it with the new one. At this point, unscrew the filler cap and pour in the new engine oil of the suitable type, adding the correct amount until reaching the maximum level mark on the dipstick!


Updated on 9 September 2026 by ScegliAuto


Related tutorials

Replacing the Diesel Filter on the Ford Focus 1.6 TDCI
Replacing the Diesel Filter on the Ford Focus 1.6 TDCI
Ford Focus (2004-2011 / MK 2, Focus 2) Today we will see step-by-step instructions on how to remove and replace the diesel filter on the Ford Focus 1.6 TDCI. First, open the engine bonnet …
Replacing the Diesel Filter of the Ford Focus 1.6 TDCi
Replacing the Diesel Filter of the Ford Focus 1.6 TDCi
Ford Focus (2004-2011 / MK 2, Focus 2) The following steps will show you how to remove and replace the diesel filter of the Ford Focus 1.6 TDCi. First, open the bonnet of the vehicle and b…
Replacing the Diesel Filter on the Ford Focus MK3 1.5 TDCI
Replacing the Diesel Filter on the Ford Focus MK3 1.5 TDCI
Ford Focus (2011-2018 / MK 3) Discover in this video how to remove and replace the diesel filter on the Ford Focus third generation, with a 1.5 TDCI engine. First, open the bonnet…

Other guides you may be interested in

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos