Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the engine oil and oil filter of the Ford Focus 3

Model: Ford Focus MK 3 - Years: 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Engine oil

See other generations:
Video tutorial

Today we will explain how to replace the engine oil and oil filter on a Ford Focus 3 car. We open the front hood and unscrew the oil filler cap, pour a pre-change detergent into the tank to make it easier to remove the oil residues inside, let the product work for 15 minutes keeping the engine at idle.

We unscrew the oil tank plug after lifting the vehicle and let the used oil drain into the container.

When the oil has finished draining, we unscrew the oil filter plug using a 21 mm wrench, remove the box and replace the filter. We mount the box and insert the new filter, lower the vehicle to the ground and pour the new oil into the tank.


Posted on 4 March 2025 by ScegliAuto


Related tutorials

Oil Change for a Ford Focus
Oil Change for a Ford Focus
Ford Focus (2011-2018 / MK 3) Perform an oil change on a Ford Focus. Open the car door and pull up the engine compartment release lever located at the bottom left of the dashboard…
How to Change Oil Filter on Ford Focus
How to Change Oil Filter on Ford Focus
Ford Focus (2011-2018 / MK 3) Replacing the oil and worn filter on a Ford Focus? Here's how to replace everything. Open the car door and pull up the engine compartment release lev…
How to change the engine oil and oil filter of the Ford Focus
How to change the engine oil and oil filter of the Ford Focus
Ford Focus (2011-2018 / MK 3) In a few simple steps, replace the engine oil and oil filter, performing the routine maintenance service on the Ford Focus. First, raise the vehicle …

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos