Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Ford
    3. :
  3. Focus
    4. : How to change engine oil on ford Focus

Ford Focus - Video tutorial

Model: Ford Focus MK 1 - Years 1998-2004
Part: Engine oil
Operation: How to change engine oil on ford Focus

How to change oil and engine filter on Ford Focus? Let's see the replacement. Let's see in this video guide how to proceed. We open the car door and pull up the engine compartment opening lever located at the bottom left of the dashboard and lift up the front hood and unscrew the oil cap. We lift the car on a jack and unscrew the oil pan pin; let the liquid flow into a container. With a socket wrench we unscrew the large locking pin of the container cap where the oil filter is located. We remove the worn oil filter and place a new one. Finally we top up the new liquid and close the front hood.


Posted on 23 November 2023 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • Focus 2011-2018 - What is the amount of engine oil needed for replacement on a Ford Focus 1.6 TDCi 90hp? Read Answer
    • Focus 2018-2025 - What is the right amount of engine oil for the Ford Focus 1.5 EcoBlue? Read Answer
    • Focus 2018-2025 - Why does the "change engine oil" light come on on the Ford Focus? Read Answer
    • Focus 2011-2018 - How much engine oil do you need for a Ford Focus 1.5 TDCi 120 hp? Read Answer
    • Focus 2004-2011 - How many liters of engine oil go on a Ford Focus 1.8 tdci? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos