How to Remove the Front Bumper from a Ford Focus

Model: Ford Focus MK 3 - Years 2011-2018
Part: Front bumper

Is the front bumper broken and needs replacing? Let's see how to remove it from the front. Lift the bonnet and secure it. Unscrew the front headlights with a socket, and using a plastic lever, remove the rivets/screws located at the top of the bumper. Unscrew the screws in the wheel arch liners and finally remove the pins located at the bottom of the bumper. Remove the bumper from the vehicle body by hand. To proceed with the installation, position the bumper on the front of the vehicle and screw in all the screws around the wheel arch liners and the perimeter of the bumper. Reattach the front headlights and connect the clips.

Updated on 15 March 2026 by ScegliAuto

This video is currently unavailable

Other guides you may be interested in

Headlight - Maintenance and repair on other vehicles

- Maintenance and repair on other vehicles

Front Bumper - Maintenance and repair on other vehicles

Wheel - Maintenance and repair on other vehicles

- Maintenance and repair on other vehicles

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!

by ScegliAuto

How to Remove the Front Bumper from a Ford Focus

Related tutorials

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

More videos