Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Mirror Bulb on Ford Focus

Model: Ford Focus MK 2, Focus 2 - Years 2004-2011
Part: Light bulb

In this video, you will learn how to change the bulb in the external rear-view mirror of the Ford Focus mk3. To do this, first detach the external trim of your mirror: use a plastic tool to lever it off. Now, detach the lower bulb holder with a screwdriver so it falls into your hand: remove it from the holder and extract the bulb. At this point, replace it with the new one and reassemble everything carefully, following each step in the video. It is advisable to use high-quality bulbs.

Updated on 18 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Mirror Bulb on a Ford Focus
Replacing the Mirror Bulb on a Ford Focus
Ford Focus (2011-2018 / MK 3) Today, you will learn how to remove and replace the bulb of the external rear-view mirror on a third-generation Ford Focus. First, tilt the mirror fo…
How to replace the turn signal bulb of the Ford Focus rearview mirror
How to replace the turn signal bulb of the Ford Focus rearview mirror
Ford Focus (2004-2011 / MK 2, Focus 2) Today's step-by-step instructions will show us how to disassemble and replace the turn signal bulb of the external rearview mirror of the Ford Focus.…
How to Replace the External Wing Mirror on a Ford Focus
How to Replace the External Wing Mirror on a Ford Focus
Ford Focus (2004-2011 / MK 2, Focus 2) Before you can start, open the front door of your Ford Focus. Begin by lowering the window, then unclip and remove the covers near the wing mirror. N…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos