Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Mirror Bulb on a Ford Focus

Model: Ford Focus MK 3 - Years 2011-2018
Part: Side marker bulb

Today, you will learn how to remove and replace the bulb of the external rear-view mirror on a third-generation Ford Focus. First, tilt the mirror forward; then remove the glass by gently prying at the edges. At this point, disconnect the electrical connector and disengage the plastic cover of the mirror; then remove the lens by extracting the bulb. All that remains is to replace it with a new one or replace the entire indicator unit; in either case, apply the reverse procedure for refitting!

Updated on 28 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the turn signal bulb of the Ford Focus rearview mirror
How to replace the turn signal bulb of the Ford Focus rearview mirror
Ford Focus (2004-2011 / MK 2, Focus 2) Today's step-by-step instructions will show us how to disassemble and replace the turn signal bulb of the external rearview mirror of the Ford Focus.…
How to Replace the External Wing Mirror on a Ford Focus
How to Replace the External Wing Mirror on a Ford Focus
Ford Focus (2004-2011 / MK 2, Focus 2) Before you can start, open the front door of your Ford Focus. Begin by lowering the window, then unclip and remove the covers near the wing mirror. N…
Replacing the Mirror Bulb on Ford Focus
Replacing the Mirror Bulb on Ford Focus
Ford Focus (2004-2011 / MK 2, Focus 2) In this video, you will learn how to change the bulb in the external rear-view mirror of the Ford Focus mk3. To do this, first detach the external tr…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos