Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Wiper Blade Replacement

Model: Ford Focus MK 2, Focus 2 - Years: 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011
Part: Windshield wipers

See other generations:
Video tutorial

If it’s time to replace the wiper blades on your Ford Focus, here’s how to do it. Obtain compatible blades (in this case, Goodyear brand, 710 mm). Remove the blade you want to replace: lift the wiper arm and press the two release tabs with your thumb and index finger; this will allow you to slide off the blade easily.

Rest the wiper arm without the blade against the windscreen (use a cloth as protection to prevent scratching the glass).

Take the new package which contains two adapters (one larger and one smaller) for the new blades. Take the larger one (suitable for the driver’s side blade) and attach it to the blade you want to fit. Now, inserting it from the top, connect the wiper arm to the adapter rail.

When you hear a "click", the blade will be secured.


Updated on 5 February 2026 by ScegliAuto


Related tutorials

How to Replace the Wipers on a Ford Focus
How to Replace the Wipers on a Ford Focus
Ford Focus (2011-2018 / MK 3) To carry out this simple and quick operation, no special tools are required. Just follow this straightforward guide to do it yourself. Lift the wiper…
How to Change Wiper Blades on Ford Focus
How to Change Wiper Blades on Ford Focus
Ford Focus (2004-2011 / MK 2, Focus 2) Are your wiper blades damaged? Here's how to replace them. Take the front wiper blade to be replaced, gently pull the movable blade as shown in the v…
Replacing the Rear Wiper Blade on Ford Focus
Replacing the Rear Wiper Blade on Ford Focus
Ford Focus (2004-2011 / MK 2, Focus 2) Are the wiper blades damaged? Here’s how to replace them. Grasp the rear wiper blade with your hands, gently pull it as shown in the video (without b…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos