Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Remove the Interior Light of the Ford Fiesta

Model: Ford Fiesta Fiesta 6, MK 6, MK VI - Years 2008-2017
Part: Interior dome light bulb

Remove the interior light of the Ford Fiesta? Here’s how to take it out from the roof panel. Leverage between the interior light and the headlining panel (detach the light gradually), pull the light out from the panel and disconnect the power connector. Replace the damaged bulb with a new one (same size and voltage). Refit the interior light into its housing (push the clear plastic with your hands until the clips lock into the side plastic). Don’t forget the electrical connector. Switch on the interior light and check its operation.

Updated on 21 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Interior Light and Bulb on a Ford Fiesta
How to Remove the Interior Light and Bulb on a Ford Fiesta
Ford Fiesta (2002-2008 / Fiesta 5, MK 5, MK V) In this video, learn how to remove and replace the damaged bulb in the interior light of a Ford Fiesta. Use a screwdriver to pry between the interior…
How to Remove the Interior Light on a Ford Fiesta
How to Remove the Interior Light on a Ford Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) Is the central cabin light in your car no longer working? Here’s how to remove and replace the bulb in the interior light of the Ford Fiesta: use a s…
How to Replace the Interior Light Fitting of the Ford Fiesta
How to Replace the Interior Light Fitting of the Ford Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) This guide outlines the steps to remove and replace the interior light fitting of the Ford Fiesta. First, get inside the vehicle and start prying at …

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos