Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove and Replace the Interior Light of a Ford Fiesta

Model: Ford Fiesta Fiesta 6, MK 6, MK VI - Years 2008-2017
Part: Instrument panel light

In this guide, remove and replace the interior light of a Ford Fiesta. Use a screwdriver to lever between the light and the headlining (without damaging the headlining), pull the light out from the panel, and disconnect the power connector. Replace any damaged bulbs with new ones (same size and voltage). Refit the previously removed light or install a new one in its housing (push it in with your hands until the metal clips lock into place). Perform the same operation for the rear light. Finally, test the correct operation of the lights.

Updated on 28 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Interior Light and Bulb on a Ford Fiesta
How to Remove the Interior Light and Bulb on a Ford Fiesta
Ford Fiesta (2002-2008 / Fiesta 5, MK 5, MK V) In this video, learn how to remove and replace the damaged bulb in the interior light of a Ford Fiesta. Use a screwdriver to pry between the interior…
Remove the Interior Light of the Ford Fiesta
Remove the Interior Light of the Ford Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) Remove the interior light of the Ford Fiesta? Here’s how to take it out from the roof panel. Leverage between the interior light and the headlining p…
How to Replace the Interior Light Fitting of the Ford Fiesta
How to Replace the Interior Light Fitting of the Ford Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) This guide outlines the steps to remove and replace the interior light fitting of the Ford Fiesta. First, get inside the vehicle and start prying at …

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos