Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Cabin Fan on Ford Focus

Model: Ford Focus MK 3 - Years: 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Blower motor

See other generations:
Video tutorial

To remove the damaged cabin fan, let's see how to do it from inside the dashboard of the Focus. Open the glove compartment and detach it from inside the dashboard (remove the drawer and all plastic parts), then unscrew the securing screws of the covering plastics to access the fan. Pull the cabin fan out from inside the dashboard (disconnect the electrical connectors from above the fan). Secure the new fan inside the dashboard plastics, and screw in the securing screws.

Turn on the ignition and test the air fan (operate the control knobs).


Updated on 29 March 2026 by ScegliAuto


Related tutorials

Replacing the Cabin Fan Resistor on a Ford Focus
Replacing the Cabin Fan Resistor on a Ford Focus
Ford Focus (2004-2011 / MK 2, Focus 2) Today's steps will show you how to remove and replace the cabin fan resistor on a Ford Focus. First, get inside the vehicle on the front passenger si…
Removing Heating Fan from Ford Focus
Removing Heating Fan from Ford Focus
Ford Focus (2004-2011 / MK 2, Focus 2) In this video tutorial, you will learn how to remove the heating cabin fan from a Ford Focus. First, remove the glove compartment: unclip the levers …
Removing the Cabin Fan on Ford Focus
Removing the Cabin Fan on Ford Focus
Ford Focus (2011-2018 / MK 3) Learn how to remove the cabin fan on a Ford Focus. The cabin ventilation fan is located directly under the dashboard. Unscrew the securing screws on …

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos