Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Ford
    3. :
  3. Fiesta
    4. : Ford Fiesta front seat removal

Ford Fiesta - Video tutorial

Model: Ford Fiesta MK VI, Fiesta 6, MK 6 - Years 2008-2017
Part: Seat
Operation: Ford Fiesta front seat removal

Today we will find out how to remove the front seats of a 7th series Ford Fiesta. We open the bonnet and go to detach the two poles of the battery in advance, unscrewing the nuts: then we open the doors and access the front of the car. Now with a torx wrench we are going to remove the screws that we find at the bottom of the seat, precisely in the guides: once done, raise the seat slightly and disconnect the electrical connector of the seat belt that we find below, pressing on the tab. We permanently remove the front seat from our car!


Posted on 29 December 2023 by ScegliAuto



How do you remove the front seat of the Ford Fiesta?
Ford Fiesta (2002-2008 / MK V, Fiesta 5, MK 5) The removal of the front seat of the Ford Fiesta is done by loosening the screws that fix the seat to the appropriate sliding rails: these screws wil
How do I remove the front seat of the Ford Fiesta?
Ford Fiesta (2008-2017 / MK VI, Fiesta 6, MK 6) In order to remove the front seat of the Ford Fiesta you have to loosen the screws located in the front part of the seat sliding rails. So to reach t
How to remove the front seat of a Ford Fiesta
Ford Fiesta (2008-2017 / MK VI, Fiesta 6, MK 6) Before we begin, we will need to open the front door of our Ford Fiesta. Let's start by pulling the front seat all the way back on its tracks. After

    Frequently Asked Questions

    • Fiesta 2008-2017 - How do you repair the seat tilting lever of the Ford Fiesta Mk6? Read Answer
    • Fiesta 2002-2008 - How to replace seat cables on Ford Fiesta? Read Answer

Fiat Ducato 2.8 JTD gearbox oil replacement

Let's see in this guide the main steps to be able to change the transmission oil of the second series Fiat Ducato, with 2.8 JTD engine. First of all we lift the car and go to locate the gear oil vent bolt, which we find near the transmission; we use a hex wrench to unscrew it, letting it drain the old oil in a container for about ten minutes. At this point we open the bonnet and remove the air intake sleeve, so as to be able to access the gearbox oil filling hole; then we fill up to the maximum level!

Watch the video!


by ScegliAuto

More videos