Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Key Fob Battery on Ford Fiesta

Model: Ford Fiesta MK 7, MK VII, Fiesta 7 - Years 2017-2023
Part: Key

In this video, see how to disassemble and replace the battery of the key fob for a Ford Fiesta MK8 by following these steps. First, take the key fob in hand and pry open the sides with something thin to separate the two parts and remove the back cover. At this point, access the battery, remove it, and replace it with a new one of the correct type (in this case, a CR 2032 3V); then insert it the right way round and reassemble the key fob cover, as shown in the video!

Updated on 1 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Disassembling the Remote Control of the Ford Fiesta
Disassembling the Remote Control of the Ford Fiesta
Ford Fiesta (2017-2023 / MK 7, MK VII, Fiesta 7) Disassembling the remote control of the Ford Fiesta to change the battery? Let's see how to disassemble the key. Take your key and use a screwdriver …
How to Replace the Remote Battery in a Ford Fiesta
How to Replace the Remote Battery in a Ford Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) In today's video, we will see how to replace the dead battery in a Ford Fiesta remote. Start by removing the plastic cover on the back. Now extract t…
How to Replace the Remote Battery of a Ford Fiesta?
How to Replace the Remote Battery of a Ford Fiesta?
Ford Fiesta (2002-2008 / Fiesta 5, MK 5, MK V) To replace the remote battery of a Ford Fiesta, use a tool like a screwdriver to lever open the slot above the manufacturer's logo: this will allow y…

Other guides you may be interested in

    Frequently Asked Questions

    • Fiesta 2008-2017 - What does the yellow wrench light on the Ford Fiesta mean? Read answer
    • Fiesta 2008-2017 - What does the wrench light on my Ford Fiesta mean? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos