Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing Door Panel on Ford Focus

Model: Ford Focus MK 4 - Years 2018-2025
Part: Door trim panel

Remove the cover of the central handle: to do this, use one or two plastic trim tools (make sure they are not metal, as this could scratch the surface). Unscrew the now exposed Torx screws. Follow the same procedure with the screw cover near the opening handle: detach the cover and unscrew the Torx screw underneath it. At this point, unscrew the screws located beneath the panel, and finally, the one in the hole to the right of the central handle. Using the trim tool, detach the triangular plastic piece on the pillar, near the window. Now you can detach the panel and disconnect the connectors.

Updated on 2 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing the Right Door Panel on a Ford Focus
Removing the Right Door Panel on a Ford Focus
Ford Focus (2004-2011 / MK 2, Focus 2) Carry out the removal of the front right door panel on a Ford Focus. Disconnect the battery terminals located in the engine bay, then using a screwdr…
Replacing the Outer Door Handle on a Ford Focus
Replacing the Outer Door Handle on a Ford Focus
Ford Focus (1998-2004 / MK 1) Briefly, we will see the steps to remove and replace the outer door handle on the front door of a Ford Focus. First, open the front door of the vehic…
Removing the Front Door Panel of the Ford Focus
Removing the Front Door Panel of the Ford Focus
Ford Focus (2004-2011 / MK 2, Focus 2) Here are the steps to remove and replace the front door panel of the Ford Focus. First, open the front door and start unscrewing the fixing screws lo…

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos