Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Front Door Panel of the Ford Focus

Model: Ford Focus MK 2, Focus 2 - Years: 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011
Part: Door trim panel

See other generations:
Video tutorial

Here are the steps to remove and replace the front door panel of the Ford Focus. First, open the front door and start unscrewing the fixing screws located under the grab handle; then, pry at the sides of the panel to detach and remove it, disconnecting the opening handle cable and the electrical connector of the window switch, as shown in the video.

At this point, replace and reassemble the door panel, following the video tutorial until the end for reassembly!


Updated on 16 July 2026 by ScegliAuto


Related tutorials

Removing the Front Door of the Ford Fiesta
Removing the Front Door of the Ford Fiesta
Ford Focus (2011-2018 / MK 3) In this guide, you will find instructions to remove and replace the front door of the Ford Fiesta in simple steps. First, open the front door and dis…
Removing the Right Door Panel on a Ford Focus
Removing the Right Door Panel on a Ford Focus
Ford Focus (2004-2011 / MK 2, Focus 2) Carry out the removal of the front right door panel on a Ford Focus. Disconnect the battery terminals located in the engine bay, then using a screwdr…
Removing the Front Door of the Ford Focus
Removing the Front Door of the Ford Focus
Ford Focus (2011-2018 / MK 3) This guide provides instructions for removing and replacing the front door of the Ford Focus. First, open the front door and disconnect the rubber tu…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos