Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Front Door of the Ford Fiesta

Model: Ford Focus MK 3 - Years 2011-2018
Part: Car door

In this guide, you will find instructions to remove and replace the front door of the Ford Fiesta in simple steps. First, open the front door and disconnect the small rubber tube located above the hinge; then, unscrew the hinge fixing screws and disconnect the electrical connector for the window switch, as shown in the video. At this point, completely remove the front door and replace it with the new one; then refit the front door by reversing the disassembly procedure!

Updated on 18 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing the Front Door of the Ford Focus
Removing the Front Door of the Ford Focus
Ford Focus (2011-2018 / MK 3) This guide provides instructions for removing and replacing the front door of the Ford Focus. First, open the front door and disconnect the rubber tu…
Removing the Front Seat of a Ford Fiesta
Removing the Front Seat of a Ford Fiesta
Ford Focus (1998-2004 / MK 1) How to remove the front seat of a Ford Fiesta? This guide explains the disassembly process. First, move the seat back (using the electric buttons if …
Removing the Right Door Panel on a Ford Focus
Removing the Right Door Panel on a Ford Focus
Ford Focus (2004-2011 / MK 2, Focus 2) Carry out the removal of the front right door panel on a Ford Focus. Disconnect the battery terminals located in the engine bay, then using a screwdr…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos