Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Rear Bulbs on Ford Fiesta

Model: Ford Fiesta Fiesta 6, MK 6, MK VI - Years 2008-2017
Part: Tail light bulb

Open the boot and remove the screws next to the affected light cluster that secure it. Slightly move the side cover in the boot to access the connector, which you need to disconnect, and the plastic clip that must be unscrewed and removed. At this point, you can extract the entire light cluster and place it on a workbench. Once done, replace any bulb by accessing from the rear of the headlamp and unscrewing it slightly before pulling it out of its socket. Then remove the bulb from the holder and insert the new one.

Updated on 5 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Rear Bulbs on the Ford Fiesta
How to Replace the Rear Bulbs on the Ford Fiesta
Ford Fiesta (2002-2008 / Fiesta 5, MK 5, MK V) In today's video, you will see a very simple maintenance operation that you can perform independently on the early 2000s Ford Fiesta. Specifically, h…
How to Replace the Rear Light Bulbs on a Ford Fiesta?
How to Replace the Rear Light Bulbs on a Ford Fiesta?
Ford Fiesta (2002-2008 / Fiesta 5, MK 5, MK V) To replace the rear light bulbs on a Ford Fiesta, lift the boot and remove the screws located next to the seal, right next to the light. This will al…
How to Replace the Rear Light Bulbs on a Ford Fiesta?
How to Replace the Rear Light Bulbs on a Ford Fiesta?
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) To replace the rear light bulbs on a Ford Fiesta, you need to remove the entire light assembly: to do this, open the boot and insert your fingers bet…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos