Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Instructions for Removing the Car Radio

Model: Ford Fiesta Fiesta 5, MK 5, MK V - Years 2002-2008
Part: Car stereo

First, remove the button panel located to the left of the car radio using a small plastic lever to access the screws securing the trim around the centre console; then disconnect the connector and unscrew the hidden screws behind the compartment door and those along the bottom edge of the trim. You will also need to remove the plastic cover located just below the steering wheel and the central tunnel panel to access additional screws securing the trim and disconnect the air duct cable. Once all screws are removed, detach the trim, the connectors linked to the climate control, and unscrew the screws securing the car radio to extract it from its housing while disconnecting the connectors.

Updated on 6 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Original Radio from a Fiesta
Ford Fiesta (2002-2008 / Fiesta 5, MK 5, MK V) Is the radio in your Fiesta due for replacement? Here’s how to remove and replace it from the dashboard. First, you need to remove the plastic trim a…
How to Remove the Radio from a Ford Fiesta
How to Remove the Radio from a Ford Fiesta
Ford Fiesta (2002-2008 / Fiesta 5, MK 5, MK V) How to remove the radio from a Ford Fiesta? Use original removal keys for the radio. Insert the keys into the holes on the plastic cover of the radio…
Removing the Radio from a Ford Fiesta
Removing the Radio from a Ford Fiesta
Ford Fiesta (2002-2008 / Fiesta 5, MK 5, MK V) Is the radio in your Ford Fiesta damaged? Here’s how to remove it. Remove the stereo trim with a plastic lever (where the radio controls are) from th…

Other guides you may be interested in

    Frequently Asked Questions

    • Fiesta 2008-2017 - What to do when the Ford Fiesta radio doesn't work? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos