Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Remote Key Battery on Ford Fiesta

Model: Ford Fiesta Fiesta 5, MK 5, MK V - Years 2002-2008
Part: Key

Is your remote key not working anymore? Let’s see how to replace the battery in the key. Take your remote key and, using a screwdriver, separate the cover from the metal key: separate the two parts. Once the two parts are separated, remove the plastic piece where the battery is located. Extract the worn battery, take a new one of the same size and voltage. Rejoin the two cover parts of your remote: fit the metal key into the cover. Check the operation of the remote key in all its parts after fitting the new battery.

Updated on 7 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Key Fob Battery on a Fiesta
How to Replace the Key Fob Battery on a Fiesta
Ford Fiesta (2002-2008 / Fiesta 5, MK 5, MK V) Is the remote battery dead? Here’s how to change the battery in the Fiesta key fob. Take your key fob and use a screwdriver to pry apart the two halv…
Change Key Battery on Fiesta
Change Key Battery on Fiesta
Ford Fiesta (2002-2008 / Fiesta 5, MK 5, MK V) How to change the battery of a Ford Fiesta key? Start by prising apart the two halves of the remote key using a screwdriver. Once separated, locate t…
How to Replace the Battery in a Ford Fiesta Key
How to Replace the Battery in a Ford Fiesta Key
Ford Fiesta (2002-2008 / Fiesta 5, MK 5, MK V) How to replace the battery in a Ford Fiesta key remote? In this video, see how to proceed with the battery replacement. Take your key remote and use …

Other guides you may be interested in

    Frequently Asked Questions

    • Fiesta 2008-2017 - What does the yellow wrench light on the Ford Fiesta mean? Read answer
    • Fiesta 2008-2017 - What does the wrench light on my Ford Fiesta mean? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos