Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Wiper Blades on Ford Focus

Model: Ford Focus MK 1 - Years 1998-2004
Part: Windshield wipers

Lift the wiper arm (arm and blade) away from the windscreen until it reaches its limit. As shown in the video, lift the hook that secures the blade to the arm, slightly bend the blade, and remove it from the umbrella-style attachment of the arm. Similarly, insert the new blade by locking it into the arm's attachment, then close the plastic hook. The operation is the same for both front wipers and also for the rear, which does not even have a closing hook. Remember not to rest the arm on the windscreen while the blade is missing.

Updated on 8 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Front Bumper from a Ford Focus
How to Remove the Front Bumper from a Ford Focus
Ford Focus (1998-2004 / MK 1) Before you start, open the bonnet of your Ford Focus. Begin by unscrewing and removing the screws and bolts located around the perimeter of the bumpe…
Replacement of the timing belt of the Ford Focus 1.6 Ti-VCT
Replacement of the timing belt of the Ford Focus 1.6 Ti-VCT
Ford Focus (2004-2011 / MK 2, Focus 2) Once a certain mileage is reached, it will be necessary to disassemble and replace the timing belt; let's see the procedure on the Ford Focus 1.6 Ti-…
Replacing the Gear Knob on Ford Focus
Ford Focus (2004-2011 / MK 2, Focus 2) On the Ford Focus 2, replacing the gear knob is very straightforward. First, pull the gaiter off the base by hand (if difficult, use a plastic wedge)…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos