Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Rear Light on a 2008 Ford Fiesta

Model: Ford Fiesta Fiesta 6, MK 6, MK VI - Years 2008-2017
Part: Tail light

In today's tutorial, you will learn how to remove the rear light to replace the bulbs on a 2008 Ford Fiesta. First, open the boot lid and unscrew the fixing screws located on the side of the light; then, pull away the seal and detach the plastic mount, as shown in the video. Next, unscrew the plastic screw of the light found at the back and disconnect the bulb connector; finally, remove the rear light from the outside and replace the bulbs!

Updated on 8 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing the Rear Light on Ford Fiesta
Removing the Rear Light on Ford Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) In today's tutorial, we will see how to remove the rear light of a Ford Fiesta in simple steps. First, open the boot lid and use a Torx screwdriver t…
Disassembly of the rear light of a Ford Fiesta
Disassembly of the rear light of a Ford Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) Through this very short video tutorial today, you will be able to see the entire necessary procedure step by step to disassemble the rear light of a …
How to remove the rear light and replace the bulbs of the Ford Fiesta
How to remove the rear light and replace the bulbs of the Ford Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) The instructions in this guide will show us how to disassemble and replace the rear light and its bulbs of the Ford Fiesta. First of all, we open the…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos