Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Dashboard of the Ford Fiesta

Model: Ford Fiesta Fiesta 6, MK 6, MK VI - Years 2008-2017
Part: Car stereo

Remove the upper plastic trim above the stereo using a suitable lever. Then, unscrew the screws located inside the dashboard. Remove the front part of the stereo and disconnect the power supply (where the control buttons are). Pull the rear of the stereo towards you and disconnect the various wiring (disconnect the power connectors and the antenna cable). Refit the original stereo or a generic brand using a suitable adapter. Secure the dashboard cover plastics at the end of the installation.

Updated on 10 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Heating Controls from a Ford Fiesta
How to Remove the Heating Controls from a Ford Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) How do you remove the air conditioning controls from a Ford Fiesta? Follow these steps. Remove the frame from the central dashboard using a plastic l…
How to Remove the Instrument Cluster of a Ford Fiesta
How to Remove the Instrument Cluster of a Ford Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) Before you start, sit in the driver's seat of your Ford Fiesta. Begin by disengaging and removing the cover located on the upper side of the instrume…
How to Remove the Manual Air Conditioning Knobs on a Ford Fiesta
How to Remove the Manual Air Conditioning Knobs on a Ford Fiesta
Ford Fiesta (2002-2008 / Fiesta 5, MK 5, MK V) How do you remove the manual air conditioning knobs on a Ford Fiesta? Follow this guide. Remove the radio using the appropriate keys, then disconnect…

Other guides you may be interested in

    Frequently Asked Questions

    • Fiesta 2008-2017 - What to do when the Ford Fiesta radio doesn't work? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos